Marburg M-625 Automatic Neck Bander
Equipment Specifications
Manufacturer | Marburg Industries, Inc. |
Model | M-625-SVPC |
Location | Connecticut |
Serial Number | 7853 |
Condition | used |
A Used Marburg Neck Bander for Tamper-Evident Sealing
Marburg Industries builds tamper-evident and shrink labeling equipment out of Vista, California, and Autocapsealer is their own trademark. Their machines show up across cosmetics, pharmaceutical, and food production. Those are the markets where a sealed closure is not optional.
This M-625-SVPC runs on a stainless steel frame with left to right container flow, rated to 150 containers per minute depending on application. It arrives paired with Marburg’s own CR6000-ST electric heat tunnel and a pull-through conveyor section, so application and shrink came from the same builder already matched to each other.
How the M-625 Applies a Band
Shrink band material comes in as layflat tubing on a reel. The machine feeds it down over a bullet that opens the flat tube into a round sleeve, cuts it to length, and drops it over the closure. From there the container moves into the heat tunnel.
Two of the included options do more work than their line items suggest. The vertical perforation unit scores the band so a customer can tear it off with a thumbnail. Skip it and you have a seal nobody opens without a knife. The powered container spacer indexing wheel earns its place at speed. Containers arriving in a solid line cannot be banded one at a time, so the wheel meters them apart and gives each one its own cycle. That is usually what separates a machine’s rated speed from the speed you see on the floor.
Container flow runs left to right, so check it against your existing line before you plan the install.
Film Sizes, Bullets, and Changeover
The machine runs layflat material from 25mm to 90mm in gauges from 50 to 70 micron, with band lengths from half an inch up to 7 inches. Maximum closure diameter is 70mm, and reels run up to 18 inches on a 5 inch core.
Changeover centers on the bullet, since that is the part sized to your container. Two come with the machine, at 74mm and 84mm. Further sizes are available as change parts when your package range grows. The sleever itself runs on 120 volt single phase with an 80 PSIG air supply, sitting on four threaded leg levelers.
Electric Heat Tunnel and Pull-Through Conveyor
The CR6000-ST is a compact electric tunnel in stainless with flow-through ventilation, 22 inches long, with an opening 3.5 inches wide by 2.5 inches tall. That opening covers the band zone, not the whole container. So the tunnel stays short and cheap to run. A 1/30 HP Dayton fan motor at 3020 RPM moves the air, and the tunnel takes 220 volt single phase.
The automatic pneumatic lift is the feature worth noticing. When the line stops, the tunnel raises itself clear of the conveyor. Anyone who has come back to a run of scorched bottles under a stalled tunnel knows what that saves.
Underneath runs a 4.5 inch wide by 108 inch long pull-through conveyor in mild steel, with adjustable guide rails and 26 inches of powered side gripper belts. The grippers hold each container square through application and shrink, so bands land straight. Conveyor elevation adjusts and is currently set at 33 inches. Overall the package measures 108 inches long by 38 inches wide by 60 inches tall.
Why Buy Used Neck Banding Machines
Tamper evidence is usually a requirement rather than a choice. Adding it should not turn into a line rebuild, and that is the appeal of this package. The sleever runs on standard 120 volt power, the tunnel mounts over conveyor, and the whole thing sits on levelers rather than bolted to a foundation.
Used neck banding machines hold up well, because the mechanics are straightforward. What wears is film path components and tunnel elements, nothing exotic. The real advantage with this one is that the sleever, tunnel, and conveyor came from a single manufacturer as a matched set. Timing between band placement and heat is the whole game on this equipment, and buying the three pieces separately means paying an integrator to solve it for you.
CWR Resources supplies used neck banding machines, shrink wrap equipment, and complete packaging lines throughout the U.S., Canada, and Mexico. To talk through closure sizes, band material, or line speed, speak with our packaging specialists or call 630-262-9595.
Details
- Manufacturer: Marburg Industries, Inc.
- Condition: Used
- Overall dimensions: 108″ L x 38″ W x 60″ H
- Neck bander: Autocapsealer M-625-SVPC
- Serial Number: 7853
- Speed: up to 150 per minute, depending on application
- Stainless steel frame construction
- Left to right container flow
- Material sizes: 25mm to 90mm layflat
- Material gauge: 50 to 70 micron
- Maximum closure/container diameter up to 70mm
- Band lengths: 1/2″ to 7″
- Reel specs: 18″ diameter with 5″ core
- Includes vertical perforation option
- Includes powered container spacer indexing wheel
- Includes (2) existing change part bullets: 74mm, 84mm
- Electrical: 120 volt, 1 Ph, 60 Hz
- Air supply: 80 PSIG
- (4) threaded leg levelers
- Shrink tunnel: Marburg CR6000-ST
- Electric heat type tunnel with flow through ventilation
- Stainless steel construction, compact design
- Overall tunnel length: 22″
- Tunnel opening: 3.5″ wide x 2.5″ tall
- 1/30 HP Dayton fan motor, 3020 RPM
- Automatic pneumatic lift mechanism (raises heat tunnel when not in use)
- Mounts over your existing conveyor
- Electrical: 220 volt, 1 Ph, 60 Hz
- Pull through conveyor section
- 4.5″ wide x 108″ long
- Mild steel construction
- Adjustable guide rails
- Powered side container gripper belts, 26″ long
- 33″ conveyor elevation (adjustable)
- Belt not included
Similar Equipment Listings
-
Southern Packaging PowerPouch IM7 Horizontal Form Fill Seal Machine
Form Fill Seal Machines, Packaging Equipment
-
Bartelt IM7-14 Horizontal Form Fill and Seal Machine SN 3572
Form Fill Seal Machines, Packaging Equipment
-
Pearson CE35 Hot Glue Case Erector SN 2007CE3511193
Case Erectors, Packaging Equipment
-
Pearson CE35 Hot Glue Case Erector SN 2009CE3512080
Case Erectors, Packaging Equipment
-
Delkor Tray Former Model TFS
Packaging Equipment, Tray Formers
-
Adco 15EX-45-SS Stainless Steel Heavy-Duty Horizontal Hand Load Cartoner
Cartoners, Packaging Equipment
-
Smipack BP800 Semi-Automatic Monobloc Shrink Wrapper and Heat Tunnel
Packaging Equipment, Shrink Wrap Equipment
-
Bosch Doboy B550 Band Sealer
Band Sealers, Packaging Equipment
-
PDC KST55-914 Steam Tunnel
Packaging Equipment, Shrink Wrap Equipment
-
Autobag 850S Bagging and Printing System
Form Fill Seal Machines, Packaging Equipment
-
Shanklin T71 Shrink Tunnel
Packaging Equipment, Shrink Wrap Equipment
-
Acasi TruCap-X-Vert Inline Capper
Cappers, Packaging Equipment
-
Smipack BP600AR 150R Shrink Wrapper
Packaging Equipment, Shrink Wrap Equipment
-
Bosch Pack 201 Horizontal Flow Wrapper SN 14-32170
Horizontal Flow Wrappers, Packaging Equipment
-
Bosch Pack 201 Horizontal Flow Wrapper SN 14-32168
Horizontal Flow Wrappers, Packaging Equipment
-
OK International Case Erector Superformer 2M
Case Erectors, Packaging Equipment
-
Packall 48″ Rotary Accumulation Table
Conveyors, Packaging Equipment
-
Mettler Toledo Hi-Speed Beltweigh XC Checkweigher SN 36601261
Checkweighers, Packaging Equipment
-
Bosch Pack 201 Horizontal Flow Wrapper SN 13-31899
Horizontal Flow Wrappers, Packaging Equipment
-
Bosch Pack 201 Horizontal Flow Wrapper SN 13-31901
Horizontal Flow Wrappers, Packaging Equipment
-
Adco 15D-105-WD Stainless Steel Semi-Automatic Horizontal Cartoner
Cartoners, Packaging Equipment
-
FOGG 18-Valve Bottle Filler with 4-Head Plastic Screw Capper
Gravity/Pressure Fillers, Packaging Equipment
-
OK International Case Erector Superformer 1M
Case Erectors, Packaging Equipment
-
CVC Spot or Wrap Around Pressure Sensitive Labeler Model 400
Labeling Machines, Packaging Equipment
-
CVC Front & Back Pressure Sensitive Labeler Model 400
Labeling Machines, Packaging Equipment
-
Preferred Packaging Automatic Shrink Tunnel PP181228
Packaging Equipment, Shrink Wrap Equipment
-
ABC Packaging Machine Corp Top Case Taper Model 436T
Case Sealers, Packaging Equipment
-
Langen B-1 Semi Automatic Horizontal Cartoner
Cartoners, Packaging Equipment
-
Kaps-All FS-B Cap Elevator Hopper
Cap Elevators, Packaging Equipment
-
Eastey EM1622T L-Bar Sealer and ET1608 Shrink Tunnel
Packaging Equipment, Shrink Wrap Equipment
-
Econocorp Pegasus Automatic Horizontal Cartoner
Cartoners, Packaging Equipment
-
Econocorp Spartan Cartoner Horizontal Intermittent
Cartoners, Packaging Equipment
-
Weigh Right Linear Scale
Industrial Scales, Packaging Equipment
-
OK International Supertaper Top Case Sealer
Case Sealers, Packaging Equipment
-
OK International Supertaper Bottom Case Taper
Case Sealers, Packaging Equipment
-
Elmar 36-Head Rotary Piston Filler RPE-736/16T w/ 16-Head Capper
Cappers, Filling Machines, Packaging Equipment, Piston Fillers
-
Langen B1-AL Automatic Horizontal Cartoner
Cartoners, Packaging Equipment
-
MCC Wraparound Labeler w/ Top Label Applicator
Labeling Machines, Packaging Equipment
-
Canco Can Seamer Model 08
Can Seamers, Packaging Equipment
-
Bosch Inline Tri-Seal Carton Closer TSC-090
Cartoners, Packaging Equipment
-
Holmatic PR-2S Cup Filler
Cup Fillers, Filling Machines, Packaging Equipment